engineering.
Oops! Looks like your browser is out of date. Is this page displaying correctly? If not, try upgrading your browser or use a different one.

Hilton London Tower Bridge.

Situated on the South Bank between Tower Bridge and London Bridge, Hilton London Tower Bridge, with its thirteen- and eight-storey wings clad in a combination of red clay tiles and metal panels to create a clean, contemporary aesthetic, was a major landmark within the new ‘More London’ masterplan.

A high-rise, high-end hotel constructed in concrete and clad with red clay and metal panels

Location
London, UK
Client
More London Estates
Architect
Jestico + Whiles
Project Value
£30 million
Floor Area
16,349 m²
Status
completed 2006
Expertise
Structures

The mixed-use, multi-phased development was designed to revitalise this disparate area close to the City of London by introducing commercial and residential uses alongside the hotel, sited around high-quality hard landscaping and public areas, with a range of cafés and restaurants. The hotel, plot five of a total of ten within the masterplan, faces the site’s central road, More London Place, to the north, whilst providing pedestrian access to the Tooley Street conservation area to the south.

Of the two sections in the 255-room hotel, the thirteen-storey wing required a two-storey basement to house a variety of amenities, while the eight-storey block had no basement. We considered waterproofing details particularly carefully, since different usages required different levels of treatment. Due to the prevalence of made ground, found in a variety of thicknesses on this brownfield site, we specified piled foundations to reduce impact on surrounding ground and mitigate differential settlement between buildings.

Above ground, concrete was an obvious choice in terms of acoustic performance, thermal mass and fireproofing. Having considered a number of structural options, we divided the design between the long-span public spaces on the lower floors, where we specified a rigid concrete sway frame, and the more regular grid structures required for bedrooms on the upper floors.

Transfer structures were required in several locations, including an 18 m column-free banqueting area on the first floor, where we specified a 2.2 m-deep fabricated steel plate girder. Above the third floor we used an ‘egg crate’ system based on a 4.2 m module and using twinwall precast walls, stiffening several of the cores. For speed of construction, concrete bathroom pods were used, pre-finished and installed whole.

Two
Manhattan
West
Lobby
'Radiant Lines'
installation
 
 
A Brick for Venice thumbnailA Brick
for Venice.
 
 
One
Gosvenor
Square
 
Stephen A. Schwarzman Centre for the Humanities thumbnailThe Stephen A. Schwarzman
Centre for the Humanities
 
 
Albert Bridge House thumbnailAlbert Bridge House.
 
 
 
Edgar's Sheds thumbnailEdgar's
Sheds.
 
 
Luton     Town FC
Stadium.
 
 
St Pancras Campus thumbnailSt Pancras
Campus.
 
 
Wind Sculpture
(TG) I
 
 
Sentosa
Sensoryscape.
 
 
The
Beacon.
 
 
Liverpool
School of
Architecture.
 
Malaika
School.
 
 
Cherry
Groce
Memorial.
 
Khudi
Bari.
 
 
Haus Gables thumbnailHaus
Gables.
 
 
10   Lewis
Cubitt
Square.
 
'Drift'
footbridge.
 
 
3290_HighRes_render_N9_hdThe
Gaumont.
 
 
5448_N8_hdCrinkle-Crankle
Concrete.
 
 
4926_HiRes_rendering_N7_hdApex
1.
 
 
5008_highRes_image_N3_hdUCB
Headquarters
Campus.
 
Manor    Road
Quarter.
 
 
17 Charterhouse
Street.
 
 
Brent Cross
Plot 15.
 
 
100-West-Cromwell-Road-thumbnail100
West Cromwell
Road.
 
Brent Cross
Plot 25.
 
 
Chapter
London
Bridge.
 
Roatan
Prospera.